TW-EAV510AC-LTE 4G router
CAT6, xDSL modem, Wifi AC, router, firewall
Automatic load balance between all WAN interfaces.
Automatic ADSL2+ and VDSL2 modem, 5 x 1 Gb Ethernet, LTE CAT 6, Wlan access point 1200 Mbps 5 Ghz and 2,5 Ghz, Firewall.
SIM slot ("normal" size SIM)
TW-EAV510 AC/LTE is and ADSL2+ and VDSL2 modem which can be used to create easily Local Area Network
- Automatic ADSL2+ and VDSL2 modem
- LTE/4G: 800/1800/2600, 3G: 900/2100
- 1600 Mbps WLAN 5 Ghz and 2.4 Ghz 802.11 b/g/n ac
- 4 x 10/100/1000 MbpsLAN port
- Firewall
- Layer 3 Load balance
4G/LTE/5G
- SIM normal size for 5G/4G (Operator deal needed separately) if 5G module installed
- Automatic Internet if APN=internet and PIN security disabled from SIM
- Max speed 300 Mbit/s / 100 Mbit/s
- Supported frequency:
LTE-FDD: B1/B3/B5/B7/B8/B20/B28/B32
LTE-TDD: B38/B40/B41
2×CA: B1+B1/B5/B8/B20/B28;B3+B3/B5/B7/B8/B20/B28; B7+B5/B7/B8/B20/B28; B20+B32; B38+B38; B40+B40; B41+B41 (Note: B32 is only for secondary component carrier) WCDMA: B1/B3/B5/B8
LTE network max performance testing results
Technical details for xDSL line
VDSL2
- G.993.2 (VDSL2) protocol
- PTM and ATM mode including dual latency
- Both Annex A and Annex B including dual latency
- Profiles supported: 8a/b/c/d, 12 a/b, 17a, 30a, 35b
- US0
- Diagnostics mode/DELT
- Bitswaps, SRA and SOS/ROC
- FEXT equalized UPBO
- Dying gasp
- INM
- G.INP
- G.vector
- Virtual Noise
ADSL protocols
- G.992.5 (ADSL2+), G.992.3 (ADSL2), G.992.2 (G-lite), G.992.1 (G.DMT)
- ANSI T1.413
- ATM/PTM mode
- Annex A/L/M
- L2 power management
- Diagnostics mode/DELT
- Bitswps and SRA
- INM
- PhyR and G.INP (framing type 1)
- Virtual noise
VPN
- PPTP, L2TP, OpenVPN, IPSec
Latest update 05.09.2023
Speedtestings
FTP x 2 , Speedtest.net and Elisa VIihde simultanously
Bridge port to desired LAN port from WAN side ADSL, VDSL or EWAN
VPN -protokollien asetusohjeet (pdf, english)
IPsec ,L2TP, PPTP, GRE
Management port change via ACL function ( WAN portti 80 --> 8080)
After add just Apply
Freedom VPN install guide
OpenVPN support
OpenVPN -guide in english modemi-modem
tai Client - modem guide
OpenVPN bridge configurations ( fw.2.53.d6 or newer)
OpenVPN GRE new guide
Add more LTE module support
Mesh -wifi Instruction
Read the PDF manual how to upgrade
From router user interface
Fw version from following pdf info from changes link for local update 05.09.2023
TW-EAV510AC-LTE6_cat12_cat20_5G_2.53.d53
Choose one of files which can be downloaded from this link under here
or AUTO to upgarde automatically when Internet led in On.
After upgrade when WIFI leds are blinking press RESET putton swicth down and keep there 12 sec and release. Wait 2 min, unit is ready.
Firmware upgrade file for local update 05.09.2023
Test certificate
- Support PC behind PTM bridge can get IP and Internet surfing through EWAN.
- Fixed special character "Å" on DHCP table.
- Hide WiFi security on SNMP.
- Fixed EWAN no IP after reboot.
- Adjust WAN DNS behavior- Operator DNS is first priority. If no DNS on Operator will use 8.8.8.8.
- Fixed Samsung TV on Sony Areena APS issue.
- Hard disk must be preformatted to one above formats
- Add more support for LTE module
- VLAN ID 7 tuki EWAN and PTM interface
- WiFi include now also WPA 3 support for security
- Add MEsh Wi-FI support
- Add SNR setting for DSL network (default -1 = auto)
- Supported SMS control function.
- Supported all bands selection for EM12/EM20
- Add GRE tap 8 tunnel support
- List of all supported LTE modules
- Improve LED all off on hidden page-http://192.168.0.254/ledtest.asp
- Support M50U dual SIM. (SIM1 first after boot. SIM1 fail, use SIM2.Will NOT support SIM1 and SIM2 failover and fallback feature.)
- Support Band info when only one band in EP-06 CA usage.
- Support NAT loopback to internal FTP server (port =21)
- Fixed 4TB UI display issue.
- Fixed Huawei MA5616 DSLAM 17a sync issue in short loops27. Support EP-06E all band.
- Quactel em12 lte cat 12 support ,max 600 Mbps and Quectel EM20 1200 Mbps CAT 20 support
- Fixed port forwarding-pptp application.
- Fixed LTE BW value display in UI
- Supported TLS=1.2 for HTTPs.
- Fixed Speedtest traffic issue when disable/enable LTE interface on EWAN/LTE all up.
- Support Mail alert
- Change this command setting-echo 'net.core.netdev_max_backlog = 5000'
- Change customization- disable G.Vector.
- Fail over in multiple WAN link use - fix
- Enhance Multiple DNS usage
- Add fixed ip settings for 40 entry DHCP server
- Add fix for memory leak with 3/4/5G modules
- Support EP-06 band selection.
- Support EM-12 band selection.
- MNC/MCC translation on 8202G info.
- Remove AT+CUSBCFG in code.
- Support 8202G LTE CA info.
- Realtek wifi security SDK päivitys
- Adds more band info to 3/4/5G UI
- Fixed security 1st key =0 cause security to default after power off/on.
- Fixed IPv6 enabled get slow issue.
- Fixed IPv6 enabled get slow issue.
- Fixed EM12 no traffice issue. (No gateway IP issue.)
- Change auto upgrade path to telewell.fi. from www.telewell.fi
- Change parameters as below speedup trafic:
- echo "4194304" > /proc/sys/net/netfilter/nf_conntrack_max
- echo "524288" > /sys/module/nf_conntrack/parameters/hashsize
- On auto upgrade feature. The Router will back to default if there is a change in config.
- Enhance support. for Teams APP video conference on 5G and 4G
Fixed xss_payload issue.
-unauthenticated_stored_xss_by_nearby_wifi_ap_ssid
-unauthenticated_stored_xss_by_poisoning_syslog
-open_redirect
-superuser_rce_for_low-level_user- Add loadbalance functionality
- Add lock to LTE band 700 Mhz possibility
- EWAN port 1Gb speed fix