TW-EAV510 AC/LTE Wlan router, CAT 4
Suitable for home and business.
Internet gaming, Youtube, Netflix etc. services, banking services, email, Internet surfing.
ADSL2+ and VDSL2 modem which can be used to creat easily Local Area Network.Automatic ADSL2+ and VDSL2 modem, 5 x 1 Gb Ethernet, Wlan access point 1200 Mbps 5 Ghz and 2,5 Ghz, Firewall. Compatibility: All OS and operators.
TW-EAV510 AC/LTE is an ADSL2+ and VDSL2 modem which can be used to create easily Local Area Network
- Automatic ADSL2+ and VDSL2 modem
- LTE/4G: 800/1800/2600, 3G: 900/2100
- 1600 Mbps WLAN 5 Ghz and 2.4 Ghz 802.11 b/g/n ac
- 2 x 10/100/1000 Mbps and 3 x 10/100 Mbps LAN port
- Firewall
- Layer 3 Load balance
3G/4G/LTE
- SIM normal size for LTE/4G/3G (Operator deal needed separately)
- Automatic Internet if APN=internet and PIN security disabled from SIM
- Max speed 150 Mbit/s / 50 Mbit/s
- Supported frequency: LTE-TDD:Band ; LTE-FDD: 1/2/3/7/8/20 , 3G 900/2100 Mhz
Technical details for xDSL line
VDSL2
- G.993.2 (VDSL2) protocol
- PTM and ATM mode including dual latency
- Both Annex A and Annex B including dual latency
- Profiles supported: 8a/b/c/d, 12 a/b, 17a
- US0
- Diagnostics mode/DELT
- Bitswaps, SRA and SOS/ROC
- FEXT equalized UPBO
- Dying gasp
- INM
- PhyR and G.INP (framing type 1)
- G.vector
- Virtual Noise
ADSL protocols
- G.992.5 (ADSL2+), G.992.3 (ADSL2), G.992.2 (G-lite), G.992.1 (G.DMT)
- ANSI T1.413
- ATM/PTM mode
- Annex A/L/M
- L2 power management
- Diagnostics mode/DELT
- Bitswps and SRA
- INM
- PhyR and G.INP (framing type 1)
- Virtual noise
Note! Latest firmare uses user id : admin
Password: Wifi key number from lables under the router.
Firmware upgrade 07.11.2018
Software file for 2.50a.d66 on download area
We recommend to do local fw upgarde
Enhancements 2.50a.d66 07.11.2018
1. Add band info to 3G/4G/LTE -status page
2. Add IPv6 usage to LAN even no IPv6 on WAN side
3. SSH enhancement
4. Add WLAN info to Status page Wl0 , WL1 etc
5. System log chance- show latest happening 1st
6. Better Ethernet speed detection
7. Add quick start setting , admin password, 3G, Wifi, LAN IP settings change quickly
8. Add IDS security function to security settings
9. Pasword field allow only HEX-chracters
10. Support Band 28 (Has to be ordered separetly)
11. Fixed % not work on Quick Start.
12. Customized setting change (Phy and IDS)
12. Change phy code to A2pvI042e.d26p. (Detailed xDSL code is attached by mail.)
14. Support http://192.168.0.254/tcwd.html to control watchdog.
15. LAN firewall on for http only.
16. Support wifi key =admin password
17. Warm boot enhancement for LTE module.
18. Fixed mail alert time.
19. Add lease time into system log
20. Fixed SDB log shown on WRR usage
21. Fixed IDS 127.0.0.1 issue.
22. imporovement on 5Ghz Wifi transmit signal level
23. Support for new LTE module which has also band LTE 700 Mhz coming LTE module whic
28. Add LTE link recover is after message LTE registered ISP will not send WAN IP for the device
SMS send command must be configured 1st
Sim in device must allow send SMS commands
Some 4G networks do not allows send SMS
then unit must be sedn to 3G mode
30. Latest fw add recovery features for LTE module usage
Note ! 1st IP is routers IP what has been set. admin is user id and password as default is Wifi Key number
http://192.168.0.254/sendsms.cmd?user=admin&password="salasana"&phone=040012312300&message=SendSMStesting
31. Support for Quactel EC25 and better recovery for LTE network issues
32. Enhanced view of 3g/4G status
33. Sierra LM940 module support
34. OpenVPN CA bug fix
35. Add Quectel ep06 CAT 6 support
36. Add original Linux root fix according qoogle
rd guidance "tcp dup ack"
Software release 2.50a.d66 Unzip packet after download and do local firmware upgarde with factory defaults
We recommend to do local fw upgarde
Enhancements 2.50a.d66 07.11.2018
1. Add band info to 3G/4G/LTE -status page
2. Add IPv6 usage to LAN even no IPv6 on WAN side
3. SSH enhancement
4. Add WLAN info to Status page Wl0 , WL1 etc
5. System log chance- show latest happening 1st
6. Better Ethernet speed detection
7. Add quick start setting , admin password, 3G, Wifi, LAN IP settings change quickly
8. Add IDS security function to security settings
9. Pasword field allow only HEX-chracters
10. Support Band 28 (Has to be ordered separetly)
11. Fixed % not work on Quick Start.
12. Customized setting change (Phy and IDS)
12. Change phy code to A2pvI042e.d26p. (Detailed xDSL code is attached by mail.)
14. Support http://192.168.0.254/tcwd.html to control watchdog.
15. LAN firewall on for http only.
16. Support wifi key =admin password
17. Warm boot enhancement for LTE module.
18. Fixed mail alert time.
19. Add lease time into system log
20. Fixed SDB log shown on WRR usage
21. Fixed IDS 127.0.0.1 issue.
22. imporovement on 5Ghz Wifi transmit signal level
23. Support for new LTE module which has also band LTE 700 Mhz coming LTE module whic
28. Add LTE link recover is after message LTE registered ISP will not send WAN IP for the device
SMS send command must be configured 1st
Sim in device must allow send SMS commands
Some 4G networks do not allows send SMS
then unit must be sedn to 3G mode
30. Latest fw add recovery features for LTE module usage
Note ! 1st IP is routers IP what has been set. admin is user id and password as default is Wifi Key number
http://192.168.0.254/sendsms.cmd?user=admin&password="salasana"&phone=040012312300&message=SendSMStesting
31. Support for Quactel EC25 and better recovery for LTE network issues
32. Enhaced view of 3g/4G status
33. Sierra LM940 module support
34. OpenVPN CA bug fix
35. Add Quectel ep06 CAT 6 support
36. Add original Linux root fix according qoogle
rd guidance "tcp dup ack"