TW-EAV510AC-B, Unit used also for 5G USB module updates
4G/5G router
This unit is also used for 5G USB module fw updates
ADSL2+ and VDSL2 modem which can be used to creat easily Local Area Network. 5 x 1 Gb Ethernet switch,
1 x USB 2.0 ,& 1 x USB 3.0 port for DLNA and 4G/5G usege, Wlan access point 1200 Mbps 5 Ghz and 2,5 Ghz,
Firewall, 4G/5G support with external USB adapter
Mesh support
USB tethering support for Huawei Pro 20 4G phones and Android
USB tethering support for 5G phones
TW-EAV510 AC is an ADSL2+ and VDSL2 modem which can be used to create easily Local Area Network, Automatic ADSL2+ and VDSL2 modem, 1200 Mbps WLAN 5 Ghz and 2.4 Ghz, 5 x 1 Gb ethernet port, Firewall, USB 2.0 and 3.0 port for DLNA and 3G/4G/5G use or NAS
Technical details
Size: dimension 14,6 cm + antenna plug 2,3 cm, width 22,2 cm, heigth 3,4 cm
Installation; Desk or wall
- Realtek Multicore CPU P8685PB (1000Mhz)
- Linux kernel
- 2 x 3 dBi Wifi Antenna
- Firewall as default
- 5 x 1000 Mb ethernet (4 x LAN, 1 x WAN)
VDSL2
- G.993.2 (VDSL2) protocol
- PTM and ATM mode including dual latency
- Both Annex A and Annex B including dual latency
- Profiles supported: 8a/b/c/d, 12 a/b, 17a and 30a , 35b
- US0
- Diagnostics mode/DELT
- Bitswaps, SRA and SOS/ROC
- FEXT equalized UPBO
- Dying gasp
- G.INP
- G.vector
- Virtual Noise
ADSL protocols
- G.992.5 (ADSL2+), G.992.3 (ADSL2), G.992.2 (G-lite), G.992.1 (G.DMT)
- ANSI T1.413
- ATM/PTM mode
- Annex A/L/M
- L2 power management
- Diagnostics mode/DELT
- Bitswps and SRA
- INP / G.INP
VPN
-PPTP
-L2TP
-IPSEC
-OpenVPN cleint / server starting from 2.53.d31
-NordVpn support starting from firmware 2.53.d37
Wifi security details and router usage details marked to bottom of the router
Support for LTE modules with TeleWell LTE USB adapter (pdf link)
New release 05.09.2023
New fw release TW-EAV510AC-B_2.53.d93
1. Supported SMS control function.
2. Supported all bands selection for EM12/EM20
3. Improve LED all off on hidden page-http://192.168.0.254/ledtest.asp
4. Support M50U dual SIM. (SIM1 first after boot. SIM1 fail, use SIM2.Will NOT support SIM1 and SIM2 failover and fallback feature.)
5. Support Band info when only one band in EP-06 CA usage.
6. Support NAT loopback to internal FTP server (port =21)
8. Ehanced 4/5G Speeds
9. DHCP fixed IP based on MAc now 40 entry
10. Common kernel finetune for 4 CPU demands in router
11. Enhanced Teams Vidoe call support
12. Enhanced WAN port speed at 1GB rate
(Pdf -format)
Latest fw on Downloads area
31.05.2023
Load balance between WAN -interfaces
Speedtestings
FTP x 2 , Speedtest.net and Elisa VIihde simultanously
Bridge port to desired LAN port from WAN side ADSL, VDSL or EWAN
VPN -protokollien asetusohjeet (pdf, english)
IPsec ,L2TP, PPTP, GRE
Management port change via ACL function ( WAN portti 80 --> 8080)
-After add just Apply
Freedom VPN install guide
OpenVPN support OpenVPN -guide in english modemi-modem
OpenVPN bridge configurations ( fw.2.53.d37 or newer)
OpenVPN GRE new guide
Express VPN guide
Add more LTE module support
05.09.2023 Add more 5G module support and security updates
Firmware version for local update in ZIP -file (TW-EAV510AC-B_2_53_d93)
Mesh -wifi verkkojen tuki. Mesh verkot (Ohjeistus on vain englanniksi)
Update file must unzipped from packet 1st
- Support PC behind PTM bridge can get IP and Internet surfing through EWAN.
- Fixed special character "Å" on DHCP table.
- Hide WiFi security on SNMP.
- Fixed EWAN no IP after reboot.
- Adjust WAN DNS behavior- Operator DNS is first priority. If no DNS on Operator will use 8.8.8.8.
- Fixed Samsung TV on Sony Areena APS issue.
- add Samba HD / NAS support up to 4TB USB 3.0 hd (Linux hd format support;FAT16、FAT32、NTFS Ext2、Ext3、Ext4
- Hard disk must be preformatted to one above formats
- Best are native Linux Ext4 and Windows NTFS
- Add more support for LTE module
- -TeleWell LTE CAT 6 and 4 model , Sierra EM7565, Telit LM940 Huawei E3272, Huawei E3276h-150
- VLAN ID 7 tuki EWAN and PTM interface
- WiFi include now also WPA 3 support for security
- Add MEsh Wi-FI support
- Add SNR setting for DSL network (default -1 = auto)
- Supported SMS control function.
- Supported all bands selection for EM12/EM20
- Add GRE tap 8 tunnel support
- List of all supported LTE modules
- Improve LED all off on hidden page-http://192.168.0.254/ledtest.asp
- Support M50U dual SIM. (SIM1 first after boot. SIM1 fail, use SIM2.Will NOT support SIM1 and SIM2 failover and fallback feature.)
- Support Band info when only one band in EP-06 CA usage.
- Support NAT loopback to internal FTP server (port =21)
- Fixed 4TB UI display issue.
- Fixed Huawei MA5616 DSLAM 17a sync issue in short loops27. Support EP-06E all band.
- Quactel em12 lte cat 12 support ,max 600 Mbps and Quectel EM20 1200 Mbps CAT 20 support
- Add support for new M50 USB 3.0 adapter for LTE modules
- APN behaviour TeleWell M50 USB 3.0 adapter Em12 LTE CAT module
- Fixed port forwarding-pptp application.
- Fixed LTE BW value display in UI
- Supported TLS=1.2 for HTTPs.
- Fixed Speedtest traffic issue when disable/enable LTE interface on EWAN/LTE all up.
- Support Mail alert
- Change this command setting-echo 'net.core.netdev_max_backlog = 5000'
- Change customization- disable G.Vector.
- Fail over in multiple WAN link use - fix
- Enhance USB 3.0 and LTE module CAT 6,12,20 support
- Enhance Multiple DNS usage
- USB port speed enhanced for 4G / 5G and usb port start delayed for 3/4/5G module period
- Add fixed ip settings for 40 entry DHCP server
- Add fix for memory leak with 3/4/5G modules
- Support EP-06 band selection.
- Support EM-12 band selection.
- MNC/MCC translation on 8202G info.
- Remove AT+CUSBCFG in code.
- Support 8202G LTE CA info.
- Realtek wifi security SDK päivitys
- Adds more band info to 3/4/5G UI
- Fixed security 1st key =0 cause security to default after power off/on.
- Fixed IPv6 enabled get slow issue.
- Fixed IPv6 enabled get slow issue.
- Fixed EM12 no traffice issue. (No gateway IP issue.)
- Change auto upgrade path to telewell.fi. from www.telewell.fi
- Change parameters as below speedup trafic:
- echo "4194304" > /proc/sys/net/netfilter/nf_conntrack_max
- echo "524288" > /sys/module/nf_conntrack/parameters/hashsize
- On auto upgrade feature. The Router will back to default if there is a change in config.
- Fixed xss_payload issue.
-unauthenticated_stored_xss_by_nearby_wifi_ap_ssid
-unauthenticated_stored_xss_by_poisoning_syslog
-open_redirect
-superuser_rce_for_low-level_user - Fixed Load balance
- Enhaced WAN port speed to 1Gb
List of all supported LTE modules with TeleWell USB -adapter
Firmaware for local updates TW-EAV510AC-B_2.53.d93 05.09.2023
List of latest info here
- Support PC behind PTM bridge can get IP and Internet surfing through EWAN.
- Fixed special character "Å" on DHCP table.
- Hide WiFi security on SNMP.
- Fixed EWAN no IP after reboot.
- Adjust WAN DNS behavior- Operator DNS is first priority. If no DNS on Operator will use 8.8.8.8.
- Fixed Samsung TV on Sony Areena APS issue.
- add Samba HD / NAS support up to 4TB USB 3.0 hd (Linux hd format support;FAT16、FAT32、NTFS Ext2、Ext3、Ext4
- Hard disk must be preformatted to one above formats
- Best are native Linux Ext4 and Windows NTFS
- Add more support for LTE module
- -TeleWell LTE CAT 6 and 4 model , Sierra EM7565, Telit LM940 Huawei E3272, Huawei E3276h-150
- VLAN ID 7 tuki EWAN and PTM interface
- WiFi include now also WPA 3 support for security
- Add MEsh Wi-FI support
- Add SNR setting for DSL network (default -1 = auto)
- Supported SMS control function.
- Supported all bands selection for EM12/EM20
- Add GRE tap 8 tunnel support
- List of all supported LTE modules
- Improve LED all off on hidden page-http://192.168.0.254/ledtest.asp
- Support M50U dual SIM. (SIM1 first after boot. SIM1 fail, use SIM2.Will NOT support SIM1 and SIM2 failover and fallback feature.)
- Support Band info when only one band in EP-06 CA usage.
- Support NAT loopback to internal FTP server (port =21)
- Fixed 4TB UI display issue.
- Fixed Huawei MA5616 DSLAM 17a sync issue in short loops27. Support EP-06E all band.
- Quactel em12 lte cat 12 support ,max 600 Mbps and Quectel EM20 1200 Mbps CAT 20 support
- Add support for new M50 USB 3.0 adapter for LTE modules
- APN behaviour TeleWell M50 USB 3.0 adapter Em12 LTE CAT module
- Fixed port forwarding-pptp application.
- Fixed LTE BW value display in UI
- Supported TLS=1.2 for HTTPs.
- Fixed Speedtest traffic issue when disable/enable LTE interface on EWAN/LTE all up.
- Support Mail alert
- Change this command setting-echo 'net.core.netdev_max_backlog = 5000'
- Change customization- disable G.Vector.
- Fail over in multiple WAN link use - fix
- Enhance USB 3.0 and LTE module CAT 6,12,20 support
- Enhance Multiple DNS usage
- USB port speed enhanced for 4G / 5G and usb port start delayed for 3/4/5G module period
- Add fixed ip settings for 40 entry DHCP server
- Add fix for memory leak with 3/4/5G modules
- Support EP-06 band selection.
- Support EM-12 band selection.
- MNC/MCC translation on 8202G info.
- Remove AT+CUSBCFG in code.
- Support 8202G LTE CA info.
- Realtek wifi security SDK päivitys
- Adds more band info to 3/4/5G UI
- Fixed security 1st key =0 cause security to default after power off/on.
- Fixed IPv6 enabled get slow issue.
- Fixed IPv6 enabled get slow issue.
- Fixed EM12 no traffice issue. (No gateway IP issue.)
- Change auto upgrade path to telewell.fi. from www.telewell.fi
- Change parameters as below speedup trafic:
- echo "4194304" > /proc/sys/net/netfilter/nf_conntrack_max
- echo "524288" > /sys/module/nf_conntrack/parameters/hashsize
- On auto upgrade feature. The Router will back to default if there is a change in config.
- Fixed xss_payload issue.
-unauthenticated_stored_xss_by_nearby_wifi_ap_ssid
-unauthenticated_stored_xss_by_poisoning_syslog
-open_redirect
-superuser_rce_for_low-level_user - EWAN port limit bug fixed