- Downloads
- TeleWell 5G_mmWave_M.2_EVB_KIT, LTE cat 18 and 5G 4 Gpbs speed Windows 10 USB 3.0, TW-EAV510AC-B router is needed for 5G module updates, VAT 0%
TeleWell 5G_mmWave_M.2_EVB_KIT, LTE cat 18 and 5G 4 Gpbs speed Windows 10 USB 3.0, TW-EAV510AC-B router is needed for 5G module updates, VAT 0%
NR 5 G mmWave
All Nr5G NSA ja SA 5G networks and mmwave frequences
SA DL 2.4 Gbps, UL 900 Mbps
NSA DL 3.2 Gbps, UL 600 Mbps
Default usage is mbim with TeleWell Windows 10/11 driver via USB -C port
Config to ethernet usage
Sign into modem via AT command port ( USB C)
Set commands as follows
Note! Sim -security off as default
Setup
AT-command port in Windows PC comes after installing windows drivers
1) Set wanted PDN context APN by AT+CGDCONT
apn -setup
AT+CGDCONT=1,"IP","internet"
All networks allowed
2) AT+QMBNCFG="AutoSel",0
3) AT+QCFG="data_interface",1,0
Enable LAN port mode
4) AT+QCFG="pcie/mode",1
mWave on only 520 module
5) AT+QMAPWAC=1
6) AT+QMMWAVE=1
At the end boot
7) reboot by AT+CFUN=1,1
USB at command port allows config check
other use full commands
AT+QNWINFO
AT+QENG="servingcell"
After boot LAN will share IP to PC when Internet IP received
After config plug off USB port and use it only while config
Windows 10/11 , Linux - use ubuntu 22.04