TeleWell 5G_mmWave_M.2_EVB_KIT, LTE cat 18 and 5G 4 Gpbs speed Windows 10 USB 3.0, TW-EAV510AC-B router is needed for 5G module updates, VAT 0%

NR 5 G mmWave

All Nr5G NSA ja SA 5G networks and mmwave frequences

SA DL 2.4 Gbps, UL 900 Mbps

NSA DL 3.2 Gbps, UL 600 Mbps

EAN

6430010927167

Technical specifications Instructions Downloads

Default usage is mbim with TeleWell Windows 10/11 driver via USB -C port

Config to ethernet usage

Sign into modem via AT command port ( USB C)

Set commands as follows

Note! Sim -security off as default

Setup

AT-command port in Windows PC comes after installing windows drivers

1) Set wanted PDN context APN by AT+CGDCONT

apn -setup

AT+CGDCONT=1,"IP","internet"

All networks allowed

2) AT+QMBNCFG="AutoSel",0

3) AT+QCFG="data_interface",1,0

Enable LAN port mode

4) AT+QCFG="pcie/mode",1

mWave on only 520 module

5) AT+QMAPWAC=1
6) AT+QMMWAVE=1

At the end boot

7) reboot by AT+CFUN=1,1

USB at command port allows config check

other use full commands

AT+QNWINFO
AT+QENG="servingcell"

After boot LAN will share IP to PC when Internet IP received

After config plug off USB port and use it only while config

Windows 10/11 , Linux - use ubuntu 22.04