- Communication
- Internet in office
- TW-EAV510AC-LTE 5G<br> 3G/4G, xDSL modem, Wifi AC, router, firewall, assembled in finland
TW-EAV510AC-LTE 5G
3G/4G, xDSL modem, Wifi AC, router, firewall, assembled in finland
Automatic load balance between all WAN interfaces.
Suitaple for home and business and any operator connections. SIm -slot SIM size "normal" size
Internet gaming, Youtube, Netflix etc services, banking services , email, Internet surfing.
ADSL2+ and VDSL2 modem which can be used to creat easily Local Area Network.Automatic ADSL2+ and VDSL2 modem, 5 x 1 Gb Ethernet, LTE CAT 16 / 5G ,
Wlan access point 1200 Mbps 5 Ghz and 2,5 Ghz, Firewall. Compatibility: All OS and operators. Supports Freedome client aps on LAN side.
Sub-6G: n1,n2,n3,n5,n7,n8,n12,n20,n25,n28,n40,n41,n66,n71,n77,n78,n79
LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B14/B17/B18/B19/
B20/B25/B26/B28/B29/B30/B32/B66/B71
LTE-TDD: B34/B38/B39/B40/B41/B42/B48
WCDMA: B1/B2/B3/B4/B5/B8
- Automatic ADSL2+ and VDSL2 modem
- 5G/4G: 800/1800/2600, 3G: 900/2100
- 1600 Mbps WLAN 5 Ghz and 2.4 Ghz 802.11 b/g/n ac together
- 4 x 10/100/1000 MbpsLAN port
- Firewall
- Layer 3 Load balance
3G/4G/5G
- SIM normal size for LTE/4G/3G (Operator deal needed separately)
- Automatic Internet if APN=internet and PIN security disabled from SIM
- Max speed 600 Mbit/s / 200 Mbit/s
- Supported frequency:
5G and LTE
Sub-6G: n1,n2,n3,n5,n7,n8,n12,n20,n25,n28,n40,n41,n66,n71,n77,n78,n79
NSA and SA networks
LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B14/B17/B18/B19/
B20/B25/B26/B28/B29/B30/B32/B66/B71
LTE-TDD: B34/B38/B39/B40/B41/B42/B48
WCDMA: B1/B2/B3/B4/B5/B8
Technical details for xDSL line
VDSL2
- G.993.2 (VDSL2) protocol
- PTM and ATM mode including dual latency
- Both Annex A and Annex B including dual latency
- Profiles supported: 8a/b/c/d, 12 a/b, 17a, 30a, 35b
- US0
- Diagnostics mode/DELT
- Bitswaps, SRA and SOS/ROC
- FEXT equalized UPBO
- Dying gasp
- INM
- G.INP
- G.vector
- Virtual Noise
ADSL protocols
- G.992.5 (ADSL2+), G.992.3 (ADSL2), G.992.2 (G-lite), G.992.1 (G.DMT)
- ANSI T1.413
- ATM/PTM mode
- Annex A/L/M
- L2 power management
- Diagnostics mode/DELT
- Bitswps and SRA
- INM
- PhyR and G.INP (framing type 1)
- Virtual noise
VPN
- PPTP, L2TP, OpenVPN, IPSec
Wight and size:
Gift box 1082 g
Router 568 g
DC power adapter : 131g 12 DC 1,6 A
Width : 32cm
thicknes : 5cm
dimension: 17,5 cm
Maximum hight when all antenna are installed: 21,5cm
Speedtestings
FTP x 2 , Speedtest.net and Elisa VIihde simultanously
Bridge port to desired LAN port from WAN side ADSL, VDSL or EWAN
VPN -guide (pdf, english)
IPsec ,L2TP, PPTP, GRE
Management port change via ACL function ( WAN portti 80 --> 8080)
-After add just Apply
Freedom VPN install guide
OpenVPN support
Included start from fw versions 2.53.d6
OpenVPN -guide in english modemi-modem
tai Client - modem guide
OpenVPN bridge configurations ( fw.2.53.d6 or newer)
OpenVPN GRE new guide
Add more LTE module support
Mesh -wifi Instruction
Latest fw for all LTE and 5G links 27.01.2022
This fw will reset to factory defaults in upgrade
Major new feature 5G and 4G Bridge
List of previous info here
- Support PC behind PTM bridge can get IP and Internet surfing through EWAN.
- Fixed special character "Å" on DHCP table.
- Hide WiFi security on SNMP.
- Fixed EWAN no IP after reboot.
- Adjust WAN DNS behavior- Operator DNS is first priority. If no DNS on Operator will use 8.8.8.8.
- Fixed Samsung TV on Sony Areena APS issue.
- VLAN ID 7 tuki EWAN and PTM interface
- WiFi include now also WPA 3 support for security
- Add MEsh Wi-FI support
- Add SNR setting for DSL network (default -1 = auto)
- Supported SMS control function.
- Supported all bands selection for EM12/EM20
- Add GRE tap 8 tunnel support
- List of all supported LTE modules
- Improve LED all off on hidden page-http://192.168.0.254/ledtest.asp
- Support M50U dual SIM. (SIM1 first after boot. SIM1 fail, use SIM2.Will NOT support SIM1 and SIM2 failover and fallback feature.)
- Support Band info when only one band in EP-06 CA usage.
- Support NAT loopback to internal FTP server (port =21)
- Fixed 4TB UI display issue.
- Fixed Huawei MA5616 DSLAM 17a sync issue in short loops27. Support EP-06E all band.
- Quactel em12 lte cat 12 support ,max 600 Mbps and Quectel EM20 1200 Mbps CAT 20 support
- Fixed port forwarding-pptp application.
- Fixed LTE BW value display in UI
- Supported TLS=1.2 for HTTPs.
- Fixed Speedtest traffic issue when disable/enable LTE interface on EWAN/LTE all up.
- Support Mail alert
- Change this command setting-echo 'net.core.netdev_max_backlog = 5000'
- Change customization- disable G.Vector.
- Fail over in multiple WAN link use - fix
- Add fixed ip settings for 40 entry DHCP server
- Add fix for memory leak with 3/4/5G modules
- Support EP-06 band selection.
- Support EM-12 band selection.
- MNC/MCC translation on 8202G info.
- Remove AT+CUSBCFG in code.
- Support 8202G LTE CA info.
- Realtek wifi security SDK päivitys
- Adds more band info to 3/4/5G UI
- Fixed security 1st key =0 cause security to default after power off/on.
- Fixed IPv6 enabled get slow issue.
- Fixed IPv6 enabled get slow issue.
- Fixed EM12 no traffice issue. (No gateway IP issue.)
- Change auto upgrade path to telewell.fi. from www.telewell.fi
- Change parameters as below speedup trafic:
- echo "4194304" > /proc/sys/net/netfilter/nf_conntrack_max
- echo "524288" > /sys/module/nf_conntrack/parameters/hashsize
- On auto upgrade feature. The Router will back to default if there is a change in config.
Latest fw 27.01.2022
Manual TW-EAV510AC-LTE+5G
5G module update via router
List of previous info here
- Support PC behind PTM bridge can get IP and Internet surfing through EWAN.
- Fixed special character "Å" on DHCP table.
- Hide WiFi security on SNMP.
- Fixed EWAN no IP after reboot.
- Adjust WAN DNS behavior- Operator DNS is first priority. If no DNS on Operator will use 8.8.8.8.
- Fixed Samsung TV on Sony Areena APS issue.
- add Samba HD / NAS support up to 4TB USB 3.0 hd (Linux hd format support;FAT16、FAT32、NTFS Ext2、Ext3、Ext4
- Hard disk must be preformatted to one above formats
- Best are native Linux Ext4 and Windows NTFS
- Add more support for LTE module
- -TeleWell LTE CAT 6 and 4 model , Sierra EM7565, Telit LM940 Huawei E3272, Huawei E3276h-150
- VLAN ID 7 tuki EWAN and PTM interface
- WiFi include now also WPA 3 support for security
- Add MEsh Wi-FI support
- Add SNR setting for DSL network (default -1 = auto)
- Supported SMS control function.
- Supported all bands selection for EM12/EM20
- Add GRE tap 8 tunnel support
- List of all supported LTE modules
- Improve LED all off on hidden page-http://192.168.0.254/ledtest.asp
- Support M50U dual SIM. (SIM1 first after boot. SIM1 fail, use SIM2.Will NOT support SIM1 and SIM2 failover and fallback feature.)
- Support Band info when only one band in EP-06 CA usage.
- Support NAT loopback to internal FTP server (port =21)
- Fixed 4TB UI display issue.
- Fixed Huawei MA5616 DSLAM 17a sync issue in short loops27. Support EP-06E all band.
- Quactel em12 lte cat 12 support ,max 600 Mbps and Quectel EM20 1200 Mbps CAT 20 support
- Add support for new M50 USB 3.0 adapter for LTE modules
- APN behaviour TeleWell M50 USB 3.0 adapter Em12 LTE CAT module
- Fixed port forwarding-pptp application.
- Fixed LTE BW value display in UI
- Supported TLS=1.2 for HTTPs.
- Fixed Speedtest traffic issue when disable/enable LTE interface on EWAN/LTE all up.
- Support Mail alert
- Change this command setting-echo 'net.core.netdev_max_backlog = 5000'
- Change customization- disable G.Vector.
- Fail over in multiple WAN link use - fix
- Enhance USB 3.0 and LTE module CAT 6,12,20 support
- Enhance Multiple DNS usage
- USB port speed enhanced for 4G / 5G and usb port start delayed for 3/4/5G module period
- Add fixed ip settings for 40 entry DHCP server
- Add fix for memory leak with 3/4/5G modules
- Support EP-06 band selection.
- Support EM-12 band selection.
- MNC/MCC translation on 8202G info.
- Remove AT+CUSBCFG in code.
- Support 8202G LTE CA info.
- Realtek wifi security SDK päivitys
- Adds more band info to 3/4/5G UI
- Fixed security 1st key =0 cause security to default after power off/on.
- Fixed IPv6 enabled get slow issue.
- Fixed IPv6 enabled get slow issue.
- Fixed EM12 no traffice issue. (No gateway IP issue.)
- Change auto upgrade path to telewell.fi. from www.telewell.fi
- Change parameters as below speedup trafic:
- echo "4194304" > /proc/sys/net/netfilter/nf_conntrack_max
- echo "524288" > /sys/module/nf_conntrack/parameters/hashsize
- On auto upgrade feature. The Router will back to default if there is a change in config.