TW-EAV510AC-B, New 1000 Mhz cpu model, Unit used also for 5G USB module updates

4G/5G router    

This unit is also used for 5G USB module fw updates 



Suitaple for home use and business secure links
Internet gaming, Youtube, Netflix etc  services, banking services , email, Internet surfing.

ADSL2+ and VDSL2 modem which can be used to creat easily Local Area Network. 5 x 1 Gb Ethernet switch,
1 x USB 2.0 ,& 1 x USB 3.0 port for DLNA and 4G/5G  usege, Wlan access point 1200 Mbps 5 Ghz and 2,5 Ghz,
Firewall, 4G/5G support  with external USB adapter
Mesh  support 

USB teathering support for Huawei Pro 20  4G phone, and Android USB .- teathering support for 5G  Phones

EAN
6430010923343

TW-EAV510 AC is an ADSL2+ and VDSL2 modem which can be used to create easily Local Area Network, Automatic ADSL2+ and VDSL2 modem, 1200 Mbps WLAN 5 Ghz and 2.4 Ghz, 5 x 1 Gb ethernet port, Firewall, USB 2.0 and 3.0 port for DLNA and 3G/4G/5G use or NAS

 

 Techincal details

 Size:dimension 14,6 cm + antenna plug 2,3cm, width 22,2cm, heigth 3,4cm 

 Installation; Desk or wall

- Realtek Multicore CPU P8685PB (1000Mhz)
- Linux kernel
- 2 x 3 dBi Wifi Antenna
- Firewall as defalt
- 5 x 1000 Mb ethernet (4 x LAN, 1 x WAN)


VDSL2

- G.993.2 (VDSL2) protocol
- PTM and ATM mode including dual latency
- Both Annex A and Annex B including dual latency
- Profiles supported: 8a/b/c/d, 12 a/b, 17a and 30a , 35b
- US0
- Diagnostics mode/DELT
- Bitswaps, SRA and SOS/ROC
- FEXT equalized UPBO
- Dying gasp
- G.INP
- G.vector
- Virtual Noise

 

ADSL protocols

- G.992.5 (ADSL2+), G.992.3 (ADSL2), G.992.2 (G-lite), G.992.1 (G.DMT)
- ANSI T1.413
- ATM/PTM mode
- Annex A/L/M
- L2 power management
- Diagnostics mode/DELT
- Bitswps and SRA
- INP / G.INP


VPN  
-PPTP
-L2TP
-IPSEC
-OpenVPN cleint / server starting from 2.53.d31
-NordVpn support starting from firmware 2.53.d37


Wifi security details and router usage details  market to bottom side of the router

 

Support  for LTE   modules with TeleWell LTE USB adapter (pdf link)

New release 05.09.2023

New fw  release TW-EAV510AC-B_2.53.d93

 

1. Supported SMS control function.

 

2. Supported all bands selection for EM12/EM20

3. Improve LED all off on hidden page-http://192.168.0.254/ledtest.asp

4. Support M50U dual SIM. (SIM1 first after boot. SIM1 fail, use SIM2.Will NOT support SIM1 and SIM2 failover and fallback feature.)

5. Support Band info when only one band in EP-06 CA usage.
6. Support NAT loopback to internal FTP server (port =21)

7. Speedhancement for  USB 3 with   LTE cat 6/12 and 5G modules

8. Ehanced  4/5G Speeds

9. DHCP fixed IP based on MAc now  40 entry

10. Common kernel finetune for 4 CPU  demands in router

11. Enhanced Teams Vidoe call support

12. Enhanced  WAN port speed at 1GB rate
 

 



Manual in English

(Pdf -format)

Latest fw on  Downloads area

31.05.2023

Load balance between WAN -interfaces


Speedtestings 
 FTP x 2 , Speedtest.net and Elisa VIihde simultanously

 

Bridge port to desired   LAN port from WAN side ADSL, VDSL or EWAN
 

VPN -protokollien asetusohjeet (pdf, english)
IPsec ,L2TP, PPTP, GRE 


Management port change via ACL function ( WAN portti 80 --> 8080)

-After add just Apply


 

Freedom VPN install guide


OpenVPN support  OpenVPN -guide in english modemi-modem

tai Client - modem guide
 

OpenVPN  bridge configurations ( fw.2.53.d37 or newer)

OpenVPN GRE  new  guide


Express VPN guide

Add more  LTE  module support
 

05.09.2023  Add more  5G module support and security updates

Firmware version for local update in ZIP -file (TW-EAV510AC-B_2_53_d93)
Mesh -wifi verkkojen tuki.  Mesh verkot (Ohjeistus on vain englanniksi)
 

Update file must unzipped from packet 1st

 

  1.  Support PC behind PTM bridge can get IP and Internet surfing through EWAN.
  2.  Fixed special character "Å" on DHCP table.
  3.  Hide WiFi security on SNMP.
  4.  Fixed EWAN no IP after reboot.
  5.  Adjust WAN DNS behavior- Operator DNS is first priority. If no DNS on Operator will use 8.8.8.8.
  6.  Fixed Samsung TV on Sony Areena APS issue.
  7.  add  Samba  HD / NAS support  up to 4TB USB 3.0 hd (Linux hd format support;FAT16、FAT32、NTFS Ext2、Ext3、Ext4
  8.  Hard disk must be preformatted to one above formats
  9.  Best are native Linux  Ext4  and Windows NTFS
  10.  
  11.  Add more support for LTE module
  12.  -TeleWell LTE CAT 6 and 4 model , Sierra EM7565, Telit LM940 Huawei E3272, Huawei E3276h-150
  13. VLAN ID 7 tuki EWAN and PTM interface
  14.  WiFi  include now  also WPA 3  support for security
  15.  Add MEsh Wi-FI support
  16.  Add SNR  setting for DSL network (default -1 = auto)
  17.  Supported SMS control function.
  18.  Supported all bands selection for EM12/EM20
  19.  Add GRE tap 8 tunnel support
  20.  List of all supported LTE modules
  21.  Improve LED all off on hidden page-http://192.168.0.254/ledtest.asp
  22.  Support M50U dual SIM. (SIM1 first after boot. SIM1 fail, use SIM2.Will NOT support SIM1 and     SIM2 failover and fallback feature.)
  23.  Support Band info when only one band in EP-06 CA usage.
  24.  Support NAT loopback to internal FTP server (port =21)
  25.  Fixed 4TB UI display issue.
  26.  Fixed Huawei MA5616 DSLAM 17a sync issue in short loops27. Support EP-06E all band.
  27.  Quactel em12 lte cat 12 support ,max 600 Mbps and Quectel EM20 1200 Mbps CAT 20 support
  28.  Add support for new  M50 USB 3.0 adapter for LTE modules
  29.  APN behaviour TeleWell M50 USB 3.0 adapter Em12  LTE CAT module
  30.  Fixed port forwarding-pptp application.
  31.  Fixed LTE BW value display in UI
  32.  Supported TLS=1.2 for HTTPs.
  33.  Fixed Speedtest traffic issue when disable/enable LTE interface on EWAN/LTE all up.
  34.  Support Mail alert
  35.  Change this command setting-echo 'net.core.netdev_max_backlog = 5000'
  36.  Change customization- disable G.Vector.
  37.  Fail over in multiple WAN link use - fix
  38.  Enhance  USB 3.0  and  LTE module CAT 6,12,20 support
  39.  Enhance Multiple DNS usage
  40. USB port speed enhanced  for 4G / 5G and usb port start delayed for 3/4/5G module period
  41. Add  fixed ip settings for 40 entry DHCP server  
  42. Add fix for  memory leak with 3/4/5G modules
  43. Support EP-06 band selection.
  44. Support EM-12 band selection.
  45. MNC/MCC translation on 8202G info.
  46. Remove AT+CUSBCFG in code.
  47. Support 8202G LTE CA info.
  48. Realtek wifi security SDK päivitys
  49. Adds more band info to 3/4/5G UI 
  50. Fixed security 1st key =0 cause security to default after power off/on.
  51. Fixed IPv6 enabled get slow issue.
  52. Fixed IPv6 enabled get slow issue.
  53. Fixed EM12 no traffice issue. (No gateway IP issue.)
  54. Change auto upgrade path to telewell.fi. from www.telewell.fi
  55. Change parameters as below speedup trafic:
  56. echo "4194304" > /proc/sys/net/netfilter/nf_conntrack_max
  57. echo "524288" > /sys/module/nf_conntrack/parameters/hashsize
  58. On auto upgrade feature. The Router will back to default if there is a change in config.
  59. Fixed xss_payload issue.
    -unauthenticated_stored_xss_by_nearby_wifi_ap_ssid
    -unauthenticated_stored_xss_by_poisoning_syslog
    -open_redirect
    -superuser_rce_for_low-level_user
  60. Fixed Load balance 
  61. Enhaced  WAN port speed to 1Gb

     


List of all supported LTE modules with TeleWell USB -adapter




 

Firmaware for local updates TW-EAV510AC-B_2.53.d93 05.09.2023

 List of latest info here

  1.  Support PC behind PTM bridge can get IP and Internet surfing through EWAN.
  2.  Fixed special character "Å" on DHCP table.
  3.  Hide WiFi security on SNMP.
  4.  Fixed EWAN no IP after reboot.
  5.  Adjust WAN DNS behavior- Operator DNS is first priority. If no DNS on Operator will use 8.8.8.8.
  6.  Fixed Samsung TV on Sony Areena APS issue.
  7.  add  Samba  HD / NAS support  up to 4TB USB 3.0 hd (Linux hd format support;FAT16、FAT32、NTFS Ext2、Ext3、Ext4
  8.  Hard disk must be preformatted to one above formats
  9.  Best are native Linux  Ext4  and Windows NTFS
     
  10.  Add more support for LTE module
  11.  -TeleWell LTE CAT 6 and 4 model , Sierra EM7565, Telit LM940 Huawei E3272, Huawei E3276h-150
  12.  
  13. VLAN ID 7 tuki EWAN and PTM interface
  14.  WiFi  include now  also WPA 3  support for security
  15.  Add MEsh Wi-FI support
  16.  Add SNR  setting for DSL network (default -1 = auto)
  17.  Supported SMS control function.
  18.  Supported all bands selection for EM12/EM20
  19.  Add GRE tap 8 tunnel support
  20.  List of all supported LTE modules
  21.  Improve LED all off on hidden page-http://192.168.0.254/ledtest.asp
  22.  Support M50U dual SIM. (SIM1 first after boot. SIM1 fail, use SIM2.Will NOT support SIM1 and     SIM2 failover and fallback feature.)
  23.  Support Band info when only one band in EP-06 CA usage.
  24.  Support NAT loopback to internal FTP server (port =21)
  25.  Fixed 4TB UI display issue.
  26.  Fixed Huawei MA5616 DSLAM 17a sync issue in short loops27. Support EP-06E all band.
  27.  Quactel em12 lte cat 12 support ,max 600 Mbps and Quectel EM20 1200 Mbps CAT 20 support
  28.  Add support for new  M50 USB 3.0 adapter for LTE modules
  29.  APN behaviour TeleWell M50 USB 3.0 adapter Em12  LTE CAT module
  30.  Fixed port forwarding-pptp application.
  31.  Fixed LTE BW value display in UI
  32.  Supported TLS=1.2 for HTTPs.
  33.  Fixed Speedtest traffic issue when disable/enable LTE interface on EWAN/LTE all up.
  34.  Support Mail alert
  35.  Change this command setting-echo 'net.core.netdev_max_backlog = 5000'
  36.  Change customization- disable G.Vector.
  37.  Fail over in multiple WAN link use - fix
  38.  Enhance  USB 3.0  and  LTE module CAT 6,12,20 support
  39.  Enhance Multiple DNS usage
  40. USB port speed enhanced  for 4G / 5G and usb port start delayed for 3/4/5G module period
  41. Add  fixed ip settings for 40 entry DHCP server  
  42. Add fix for  memory leak with 3/4/5G modules
  43. Support EP-06 band selection.
  44. Support EM-12 band selection.
  45. MNC/MCC translation on 8202G info.
  46. Remove AT+CUSBCFG in code.
  47. Support 8202G LTE CA info.
  48. Realtek wifi security SDK päivitys
  49. Adds more band info to 3/4/5G UI 
  50. Fixed security 1st key =0 cause security to default after power off/on.
  51. Fixed IPv6 enabled get slow issue.
  52. Fixed IPv6 enabled get slow issue.
  53. Fixed EM12 no traffice issue. (No gateway IP issue.)
  54. Change auto upgrade path to telewell.fi. from www.telewell.fi
  55. Change parameters as below speedup trafic:
  56. echo "4194304" > /proc/sys/net/netfilter/nf_conntrack_max
  57. echo "524288" > /sys/module/nf_conntrack/parameters/hashsize
  58. On auto upgrade feature. The Router will back to default if there is a change in config.
  59. Fixed xss_payload issue.
    -unauthenticated_stored_xss_by_nearby_wifi_ap_ssid
    -unauthenticated_stored_xss_by_poisoning_syslog
    -open_redirect
    -superuser_rce_for_low-level_user
  60. EWAN port limit bug fixed