TeleWell 5G_mmWave_M.2_EVB_KIT, LTE cat 18 and 5G 4 Gpbs speed Windows 10 USB 3.0, TW-EAV510AC-B router is needed for 5G module updates , VAT 0%

NR 5 G mmWave

Kaikki Nr5G NSA ja SA 5G networks and mmwave frequences

SA DL 2.4 Gbps, UL 900 Mbps

NSA DL 3.2 Gbps , UL 600 Mbps

EAN

6430010927167

Technical specifications Instructions Downloads

Default usage is mbim with TeleWell Windows 10/11 driver via USB -C port

Config to ethernet usage

sign into modem via AT command port ( USB C)

Set commands as follows

Note! Sim -security off as default

Setup

AT-command port in Windows PC comes after installing windows drivers

1) Set wanted PDN context APN by AT+CGDCONT

apn -setup

AT+CGDCONT=1,"IP","internet"

All networks allowed

2) AT+QMBNCFG="AutoSel",0

3) AT+QCFG="data_interface",1,0

Enable LAN port mode

4) AT+QCFG="pcie/mode",1

mWave on only 520 module

5) AT+QMAPWAC=1
6) AT+QMMWAVE=1

At the end boot

7) reboot by AT+CFUN=1,1

USB at command port allows config check

other use full commands

AT+QNWINFO
AT+QENG="servingcell"

After boot LAN will share IP to PC when Internet IP received

After config plug off USB port and use it only while config

Windows 10/11 , Linux - use ubuntu 22.04