TW-EAV510 Wifi 6Ax , Mesh, 5G 700-3800 Mhz support, VDSL2- modeemi, router, firewall, 4 port switch , port 4 is WAN, DynDNS

TW-EAV510AC Wifi 6Ax  rouer, firewall, 4G/5G router
Automatic load balance between all WAN interfaces.

Suitaple for home and business and any operator connections. SIm -slot  SIM size "normal" size

Internet gaming, Youtube, Netflix etc  services, banking services , email, Internet surfing.
ADSL2+ and VDSL2 modem which can be used to creat easily Local Area Network. Firewall is default on, 

Wlan access point 1200 Mbps 5 Ghz and 2,5 Ghz, Firewall. Compatibility: All OS and operators. Any VPN server

Just choose  wanted 5G  or 4G  module in order

SMS remote management added since code base 3.44.r8

LTE/5G Bridge function if needed for users own firewalls

DynDNS support



New features add into  router  15.02.2024


1. Based on 3.44.r17, Samba enhanced support for big HDD and multiple Samba mount

2. Supported SMS control. (Please refer to SMS control guide_20221128.pdf in attachment.)
3. Extend MAC-base numbers(40) in LAN>DHCP
4. Modified WiFi key display in WPS page.

5. Add LTE / 5G bridge
6. Remote  sms management
7. Security fixes on LAN vulnerability

Fixed xss_payload issue

8. Port forwarding rules now  8 - >>> 60 Entry

9. Add  Vodafone / 02 / Infisim DATA roaming support  to any opeator area


TW-EAV510 Wifi 6 Ax  and ADSL2+ and VDSL2 modem which can be used to create easily Local Area Network

Mesh  support  ready since 13.10.2022  and  document for it  at downloads area


- Automatic ADSL2+ and VDSL2 modem

- 4G/5G: 700- 4000Mhz  based on selected module

- 1200 Mbps WLAN 5 Ghz and 2.4 Ghz 802.11 b/g/n ac

- 4 x 10/100/1000 MbpsLAN port (port 4 defult is ewan usage)

- Firewall

- Layer 3 Load balance

-Older  4G  USB dongles  will work partially , at least TeleWell USB CAT 6  is ok used with USB dongle SIM slot




SIM normal size for LTE/4G/3G (Operator deal needed separately)

- Automatic Internet if APN=internet and PIN security disabled from SIM
- Max speed 800 Mbit/s / 200 Mbit/s

Supported frequency:  

B1- B42


Technical details for xDSL line



- G.993.2 (VDSL2) protocol

- PTM and ATM mode including dual latency

- Both Annex A and Annex B including dual latency

- Profiles supported: 8a/b/c/d, 12 a/b, 17a, 30a, 35b

- US0

- Diagnostics mode/DELT

- Bitswaps, SRA and SOS/ROC

- FEXT equalized UPBO

- Dying gasp



- G.vector

- Virtual Noise


ADSL2+ and  protocols

- G.992.5 (ADSL2+), G.992.3 (ADSL2), G.992.2 (G-lite), G.992.1 (G.DMT)

- ANSI T1.413

- ATM/PTM mode

- Annex A/L/M

- L2 power management

- Diagnostics mode/DELT

- Bitswps and SRA


- PhyR and G.INP (framing type 1)

- Virtual noise




- PPTP, L2TP, OpenVPN, IPSec

Read the PDF manual how to upgrade

From router user interface

AUTO to upgarde automatically when Internet led in On.

Model: TW-EAV510 WiFi 6ax upgrade 15.02.2024


FW: 3.44.r17 (zip packet must unzip before update and factory defaults in must to use)


Release Note:
1. Fixed UI locked when select to 3G setting page.
2. Modified USB0 interface display.
3. Changed default customization base on Mesh setting.
4. Support WPS button to trigger EasyMesh.
5. Ipv6 fix
6. UI is  faster now
7. Security fixes on LAN vulnerability

Fixed xss_payload issue

8. APN change do not  need  boot

9. 4G / 5G CA info add more info

For EasyMesh quick guide is as below:

Under TeleWell default.
1. Set Controller +5G on Easy Mesh page.
2. Press WPS button to trigger EasyMesh.
3. Agent try to connect to controller.
4. Connection is Done.

Ad support  for large HDD in Samba  service

Call samba   as  in picture sample by usin gyour own router  ip , sample has

TW-EA510 Wifi 6Ax

-Internet in use, over  ADSL, VDSL, 4G, 5G
-Add  sms support nad  dhcp , mac IP share 40 user (was 8)

New  fw  release  15.02.2023

Security fixes on LAN vulnerability

Fixed xss_payload issue


5G eliminate  poor  band 77-90  

Will require this fw update done locally with reset to defaults


Mesh document 27.10.2022

SMS control 22.11.2022

LTE/5G bridge 15.12.2022 (must upgarde via factory defaults)

Add big HDD  support into Samba

CE approval (pdf)