- Communication
- Internet at home
- 3G/4G/5G antenna
- TeleWell 5G_mmWave_M.2_EVB_KIT, LTE cat 18 and 5G 4 Gpbs speed Windows 10 USB 3.0, TW-EAV510AC-B router is needed for 5G module updates , VAT 0%
TeleWell 5G_mmWave_M.2_EVB_KIT, LTE cat 18 and 5G 4 Gpbs speed Windows 10 USB 3.0, TW-EAV510AC-B router is needed for 5G module updates , VAT 0%
NR 5 G mmWave
Kaikki Nr5G NSA ja SA 5G networks and mmwave frequences
SA DL 2.4 Gbps, UL 900 Mbps
NSA DL 3.2 Gbps , UL 600 Mbps
Default usage is mbim with TeleWell Windows 10/11 driver via USB -C port
Config to ethernet usage
sign into modem via AT command port ( USB C)
Set commands as follows
Note! Sim -security off as default
Setup
AT-command port in Windows PC comes after installing windows drivers
1) Set wanted PDN context APN by AT+CGDCONT
apn -setup
AT+CGDCONT=1,"IP","internet"
All networks allowed
2) AT+QMBNCFG="AutoSel",0
3) AT+QCFG="data_interface",1,0
Enable LAN port mode
4) AT+QCFG="pcie/mode",1
mWave on only 520 module
5) AT+QMAPWAC=1
6) AT+QMMWAVE=1
At the end boot
7) reboot by AT+CFUN=1,1
USB at command port allows config check
other use full commands
AT+QNWINFO
AT+QENG="servingcell"
After boot LAN will share IP to PC when Internet IP received
After config plug off USB port and use it only while config
Windows 10/11 , Linux - use ubuntu 22.04