TW-EAV510 AC/LTE Wlan router, CAT 4

Suitaple for home and business.
Internet gaming, Youtube, Netflix etc  services, banking services , email, Internet surfing.
ADSL2+ and VDSL2 modem which can be used to creat easily Local Area Network.Automatic ADSL2+ and VDSL2 modem, 5 x 1 Gb Ethernet, , Wlan access point 1200 Mbps 5 Ghz and 2,5 Ghz, Firewall. Compatibility: All OS and operators.

EAN
6430010923350

TW-EAV510 AC/LTE is an ADSL2+ and VDSL2 modem which can be used to create easily Local Area Network

 

- Automatic ADSL2+ and VDSL2 modem

- LTE/4G: 800/1800/2600, 3G: 900/2100

- 1600 Mbps WLAN 5 Ghz and 2.4 Ghz 802.11 b/g/n ac

- 2 x 10/100/1000 Mbps and 3 x 10/100 Mbps LAN port

- Firewall

- Layer 3 Load balance

 

 

3G/4G/LTE

SIM normal size for LTE/4G/3G (Operator deal needed separately)

- Automatic Internet if APN=internet and PIN security disabled from SIM
- Max speed 150 Mbit/s / 50 Mbit/s

- Supported frequency:  LTE-TDD:Band  ; LTE-FDD: 1/2/3/7/8/20 , 3G 900/2100 Mhz

 

Technical details for xDSL line

 

VDSL2

- G.993.2 (VDSL2) protocol

- PTM and ATM mode including dual latency

- Both Annex A and Annex B including dual latency

- Profiles supported: 8a/b/c/d, 12 a/b, 17a

- US0

- Diagnostics mode/DELT

- Bitswaps, SRA and SOS/ROC

- FEXT equalized UPBO

- Dying gasp

- INM

- PhyR and G.INP (framing type 1)

- G.vector

- Virtual Noise

 

ADSL protocols

- G.992.5 (ADSL2+), G.992.3 (ADSL2), G.992.2 (G-lite), G.992.1 (G.DMT)

- ANSI T1.413

- ATM/PTM mode

- Annex A/L/M

- L2 power management

- Diagnostics mode/DELT

- Bitswps and SRA

- INM

- PhyR and G.INP (framing type 1)

- Virtual noise

Manual

Note! , Latest firmare  uses  user id : admin

Password :  Wifi key number from lables under the router.

Firmware  upgrade 07.11.2018


Software file for 2.50a.d66 on download area 


We recommend to do local  fw  upgarde

Enhancements 2.50a.d66 07.11.2018

1. Add band info to 3G/4G/LTE -status page
2. Add  IPv6  usage  to LAN even  no IPv6 on WAN side
3. SSH enhancement
4. Add WLAN info to Status page Wl0 , WL1  etc  
5. System log chance- show  latest happening 1st
6. Better Ethernet speed detection
7. Add quick start setting , admin password, 3G, Wifi, LAN IP settings change quickly
8. Add IDS  security function to security settings
9. Pasword field allow only  HEX-chracters

10. Support Band 28 (Has to be ordered separetly)

11. Fixed % not work on Quick Start.

12. Customized setting change (Phy and IDS)

12. Change phy code to A2pvI042e.d26p. (Detailed xDSL code is attached by mail.)

14. Support http://192.168.0.254/tcwd.html to control watchdog.

15. LAN firewall on for http only.

16. Support wifi key =admin password

17. Warm boot enhancement for LTE module.

18. Fixed mail alert time.

19. Add lease time into system log

20. Fixed SDB log shown on WRR usage

21. Fixed IDS 127.0.0.1 issue.

22. imporovement on 5Ghz Wifi transmit signal level

23. Support for  new  LTE  module which has also band LTE 700 Mhz coming  LTE  module whic

24. Band shown issue
25. DDNS-Zonnedit crash issue
26. CVE2016-10229
27  IP Ping  fixed on LAN firewall enabled
28. Add LTE link recover is after message LTE registered ISP will not send WAN IP  for the device
29. Sens SMS message fvia http commandPassword has to be atleast 16 chraster "Wifi Key is default"
SMS send command  must be configured 1st 
Sim in device  must allow send SMS commands
Some 4G networks do not allows send SMS
then unit must be sedn to 3G mode

30. Latest fw  add recovery features  for LTE module usage
 
Command syntax is here

Note ! 1st IP is  routers  IP what has been set. admin is  user id  and password  as  default is  Wifi Key number


http://192.168.0.254/sendsms.cmd?user=admin&password="salasana"&phone=040012312300&message=SendSMStesting
 

31. Support for Quactel EC25  and better  recovery for LTE network issues

32. Enhaced  view of 3g/4G status 

33. Sierra LM940 module support

34. OpenVPN CA bug fix

35. Add Quectel ep06  CAT 6  support

36. Add original Linux root fix according qoogle
      rd guidance  "tcp dup ack"

 

1. Change 5G setting to US =Finland
2. Band shown issue
3. DDNS-Zonnedit crash issue
4. .CVE2016-10229
5. IP Ping  fixed on LAN firewall enabled


Software release 2.50a.d66  Unzip packet after  download and  do local  firmware  upgarde  with  factory defaults


We recommend to do local  fw  upgarde

Enhancements 2.50a.d66 07.11.2018

1. Add band info to 3G/4G/LTE -status page
2. Add  IPv6  usage  to LAN even  no IPv6 on WAN side
3. SSH enhancement
4. Add WLAN info to Status page Wl0 , WL1  etc  
5. System log chance- show  latest happening 1st
6. Better Ethernet speed detection
7. Add quick start setting , admin password, 3G, Wifi, LAN IP settings change quickly
8. Add IDS  security function to security settings
9. Pasword field allow only  HEX-chracters

10. Support Band 28 (Has to be ordered separetly)

11. Fixed % not work on Quick Start.

12. Customized setting change (Phy and IDS)

12. Change phy code to A2pvI042e.d26p. (Detailed xDSL code is attached by mail.)

14. Support http://192.168.0.254/tcwd.html to control watchdog.

15. LAN firewall on for http only.

16. Support wifi key =admin password

17. Warm boot enhancement for LTE module.

18. Fixed mail alert time.

19. Add lease time into system log

20. Fixed SDB log shown on WRR usage

21. Fixed IDS 127.0.0.1 issue.

22. imporovement on 5Ghz Wifi transmit signal level

23. Support for  new  LTE  module which has also band LTE 700 Mhz coming  LTE  module whic

24. Band shown issue
25. DDNS-Zonnedit crash issue
26. CVE2016-10229
27  IP Ping  fixed on LAN firewall enabled
28. Add LTE link recover is after message LTE registered ISP will not send WAN IP  for the device
29. Sens SMS message fvia http commandPassword has to be atleast 16 chraster "Wifi Key is default"
SMS send command  must be configured 1st 
Sim in device  must allow send SMS commands
Some 4G networks do not allows send SMS
then unit must be sedn to 3G mode

30. Latest fw  add recovery features  for LTE module usage
 
Command syntax is here

Note ! 1st IP is  routers  IP what has been set. admin is  user id  and password  as  default is  Wifi Key number


http://192.168.0.254/sendsms.cmd?user=admin&password="salasana"&phone=040012312300&message=SendSMStesting
 

31. Support for Quactel EC25  and better  recovery for LTE network issues

32. Enhaced  view of 3g/4G status 

33. Sierra LM940 module support

34. OpenVPN CA bug fix

35. Add Quectel ep06  CAT 6  support

36. Add original Linux root fix according qoogle
      rd guidance  "tcp dup ack"